ITEM MARKED AS PICK UP IN STORE ONLY

Building a temporary stockyard for larger livestock? Our heavy duty cleats will secure your panels together with minimum hassle. WIDTH: 50mm HEIGHT: 50mm SHAPE: L DROP PIN: 16mm SSC: LP40ZP

ITEM MARKED AS PICK UP IN STORE ONLY

The threaded shank is inserted into a pre-drilled hole and then screwed in tapping its own thread. The galvanised coating is suitable for most outdoor applications and use in treated timbers.

SSC: F M10075 CS G

ITEM LISTED AS PICK UP IN STORE ONLY

About Our Top Saddles Each top saddle is made from galvanised steel for a long last and strong saddle. The product can easily be welded or screwed to a timber post. The 25NB top saddle is also available for round posts. Instead of the standard flat backing, we have curved it for a smoother fit.

SSC: TS25HD

ITEM MARKED AS PICK UP IN STORE ONLY

Drop pins are a simple yet effective way to join two panels together. If you are setting up you yard, it’s as simple as dropping a pin through the top and bottom clips to join the panels together. Our hot dipped galvanised 16mm drop pin fits brilliantly with our heavy duty panel clips. All of our pins are made from quality steel, to ensure you get a strong and reliable product. A good rule of thumb is to buy two pins per panel if you have cleats on the bottom of the panel. For example, if I have 20 panels, each with a top and bottom cleat on each side, then I will need 40 pins. PIN Ø: 16mm LENGTH: 200mm FINISH: Galvanised SSC: DP16200G

ITEM MARKED AS PICK UP IN STORE ONLY

Our mild steel bolt-on bottom pins come in three different sizes to suit most farm gate sizes. It can be welded or screwed on to the bottom of your post, ready for you to sit your gate on top. Paired with a top saddle, you can expect a smooth gate swing. PIN Ø: 27mm FINISH: Galvanised SSC: BOBP25

ITEM MARKED AS PICK UP IN STORE ONLY

Looking for a simple way to keep your gate closed? Our galvanised hook latches offer an easy no frills way to keep your gate shut. CHAIN LENGTH: 500mm LATCH TYPE: Standard Hook INCLUDES: 1 Latch, 1 Staple SSC: CL500

ITEM MARKED AS PICK UP IN STORE ONLY

Simple. Adjustable. NO MORE Sagging Gates. Looking for an easy to install, adjustable bolt-on hinge set that won’t let your gate sag? This bolt-on adjustable hinge for round posts, is strong, simple to install, safe for livestock, long-lasting, and will never sag, even hanging an extra long gate! No welding, easily adjustable, and rust-resistant. This patent-protected design will have your gates swinging smoothly faster than you thought possible. SSC: FG6100

ITEM MARKED AS PICK UP IN STORE ONLY

HEIGHT: 100mm WIDTH (OPEN): 100mm FINISH: Zinc SSC: BH100100

ITEM MARKED AS PICK UP IN STORE ONLY

HEIGHT: 100mm WIDTH (OPEN): 75mm FINISH: Zinc SSC: BH10075

PICK UP IN STORE ONLY

Aviary and Cage Mesh

Aviary Mesh – Medium Birds

• Ideal for most medium birds
• Hot dip galvanised after manufacture for maximum corrosion protection

Standard 12mm x 25mm (½” x 1″) aperture keeps vermin out

Product Details

12mm x 25mm (½” x 1″) and 12mm x 12mm (½” X ½”) aperture

Jack Aviary Mesh is rectangular aperture mesh ideal for most medium sized birds such as Peachface, Cockatiels, African Love Birds and smaller Parrots.

The rectangular shape allows very good visibility into the aviary. It is also suitable for many uses beyond aviary making.

Suggested breeds are a guide only – actual mesh used will also depend on the design and construction of your cage, aviary or pen. Be sure to take into account wire diameter, aperture and roll size when selecting mesh for a project.

Note: It is recommended that new galvanised wire mesh used in aviaries and pet cages be treated to remove excess zinc that could possibly harm the pets. Shave off any zinc spikes with a utility knife. The mesh should then be scrubbed with a mild solution of vinegar (2 cups in a bucket of water), and rinsed with clean water.

PICK UP IN STORE ONLY

Aviary and Cage Mesh

Aviary Mesh – Large Birds

• High strength mesh suitable for large birds
• Hot dip galvanised after manufacture for maximum corrosion protection

Enhanced viewing

Product Details

High Strength Aviary Meshes

Jack Large Bird Aviary Meshes are high in strength. Come in a range of various apertures and wire diameters to enhance both viewing and properly secure larger birds.

Suitable for birds such as Galahs, Corellas, African Love Birds and all Australian Parrots. For cockatoos and macaws, we recommend a very high-strength mesh such as our Mesh Panel range.

Suggested breeds are a guide only – actual mesh will also depend on the design and construction of your cage, aviary or pen. Please consult breeders to correctly choose mesh suitable for your birds.

Note: It is recommended that new galvanised wire mesh used in aviaries and pet cages be treated to remove excess zinc that could possibly harm the pets. Shave off any zinc spikes with a utility knife. The mesh should then be scrubbed with a mild solution of vinegar (2 cups in a bucket of water), and rinsed with clean water.

PICK UP IN STORE ONLY
Aviary and Cage Mesh

Cage Mesh

• Ideal for permanent housing small-medium animals
• Cage Making Roll size makes cage 1.5m x 1.0m x 0.6m
• Heavy duty, high strength wire

Manufactured from galvanised wire

Product Details

50mm x 25mm (2″ x 1″) rectangular aperture OR 25mm (1″) square aperture

Jack Cage Making Mesh (50 x 25mm) has been developed to provide a sturdy, long lasting cage. It is the ideal choice for permanent housing of small to medium size animals.

The increased aperture provides good viewing and the 8m roll length is the perfect size for making a cage 1.5m x 1.0m x 0.6m.

Cage Making Mesh is also suitable for many other uses. Please take into account wire diameter, aperture and roll size when selecting mesh for your project.

Jack Cage mesh (25 x 25mm) is a versatile, medium weight economical mesh with good viewing properties. Ideal for cages or pen housing for small-medium animals such as rabbits and guinea pigs.

The welded steel mesh has been hot dip galvanised after manufacture for maximum corrosion protection.

Cage Mesh is also suitable for many other uses. Please take into account wire diameter, aperture and roll size when selecting mesh for your project.

Note: It is recommended that new galvanised wire mesh used in aviaries and pet cages be treated to remove excess zinc that could possibly harm the pets. Shave off any zinc spikes with a utility knife. The mesh should then be scrubbed with a mild solution of vinegar (2 cups in a bucket of water), and rinsed with clean water.

POST CAP YELLOW 60MM

• Uniqe fin grip system
• Snugly fits post - no need to tie down
• Handy pack of 40

PICK UP IN STORE ONLY

Aviary Mesh – Small Birds

• Hot dip galvanised
• Small aperture, lightweight

Ideal for most small home variety birds

Product Details

12mm (1/2″) aperture

Jack Aviary Mesh is an economical, small aperture, lightweight mesh. Ideal for most small home variety birds such as Finches, Budgerigars & Canaries. It allows good visibility into the aviary whilst keeping out most vermin. Also suitable for many uses beyond aviary making. Hot dip galvanised after manufacture for maximum corrosion protection.

It comes standard in 30m packs and is also available in convenient 5m and 10m packs for smaller jobs.

Suggested breeds are a guide only – the actual mesh used will also depend on the design and construction of your cage, aviary or pen. Be sure to take into account wire diameter, aperture and roll size when selecting a mesh for a project.

Note: It is recommended that new galvanised wire mesh used in aviaries and pet cages be treated to remove excess zinc that could possibly harm pets. Shave off any zinc spikes with a utility knife. The mesh should then be scrubbed with a mild solution of vinegar (2 cups in a bucket of water), and rinsed with clean water.

PICK UP IN STORE ONLY

Mouse Mesh

• Suitable for mice, guinea pigs and small birds
• Hot dip galvanised for maximum corrosion protection
• Small aperture of 6.5×6.5mm

Very lightweight at 0.60mm wire diameter

Product Details

6.5mm (1/4″) square aperture

Jack Mouse and Snake Mesh is ideal for building aviaries for small birds such as finches. With a small aperture of 6.5 x 6.5mm and 0.60mm wire diameter, it is perfect for protecting the bottom of your aviary or cage from unwanted vermin.

It comes in standard 30m packs and is available in convenient 5m and 10m packs for smaller jobs.

Be sure to take into account wire diameter, aperture and roll size when selecting mesh for a project.

Note: It is recommended that new galvanised wire mesh used in aviaries and pet cages be treated to remove excess zinc that could possibly harm the pets. Shave off any zinc spikes with a utility knife. The mesh should then be scrubbed with a mild solution of vinegar (2 cups in a bucket of water), and rinsed with clean water.

PICK UP IN STORE ONLY

Chicken Netting

• Versatile netting for chicken enclosures & garden use
• Standard 50mm (2″) hex aperture
• Wire diameter is 1.00mm for light duty applications
• Also available in 1.4 for HD applications

Easy to shape & mould


Product Details

50mm (2″) hex aperture

Jack Chicken Netting is a strong and flexible netting with a wire diameter of 1.00mm and a standard hexagon aperture of 50mm. It is an all-purpose netting ideal for poultry yards, chicken coops, plant protection and garden trellising.

It is made from galvanised steel wire for strength and additional protection from the weather.

It comes standard in 50m packs.

Note: It is recommended that new galvanised wire mesh used in aviaries and pet cages be treated to remove excess zinc that could possibly harm the pets. Shave off any zinc spikes with a utility knife. The mesh should then be scrubbed with a mild solution of vinegar (2 cups in a bucket of water), and rinsed with clean water.

Handy Hint:

Be sure to take into account the wire diameter, aperture and roll size when selecting mesh for a project.

PICK UP IN STORE ONLY

- 30cm picket spacings ideal for stock, boundary and internal fencing

- 15cm picket spacing for more intensive famring

- Standard Galvanised to AS4534/W02Z 2.50mm

- high tensile line wires and 2.50mm vertical stay wires

- Ideal for stock, boundary and internal fencing, it features flexible knot which absorbs stock impact.

The strength of the tightly wrapped hinged joint knot resists livestock pressure while remaining flexible enough to retain its structure.

- Length 100m

- Line Picket Wire Dia 2.5mm

- Hinged Joint Farm Fencing

- Picket Wire Dia 2.5mm

- Galv Coating standard

- Weight 69kg

SSC: 10299

PICK UP IN STORE ONLY
Long lasting & strong.

Looking for some strong galvanised steel fence posts? Our DRIVE-TIGHT steel strainer posts are perfect for the job and easy to install.

More Ground Anchorage For A Stronger Strainer Post

When it comes to end assemblies, you want something that’s built to last. Rotech Rural’s Drive-Tight anchor lugs give our posts 8 times more ground anchorage than regular posts, so they can handle any kind of soil (even deep black soils), flood-prone areas or rocky terrain. You can trust that your end assemblies will stay put, no matter the conditions. Plus, the larger ground anchorage can support heavier strains without shifting or leaning. With Drive-Tight, you can have peace of mind knowing your fence is solid and secure

Key Features

Hand Drivable

Galvanised

Easy Install

Strong 100NB (114mm O.D) Posts

No Machinery Required

Termite Resistant

Fire Resistant

 
SSC: RSPDT100

PICK UP IN STORE ONLY

Made in Australia from Waratah grade specific steel this is the strongest, toughest, and most flexible Waratah post ever made.

Hot dipped galvanized coating (min 600g/m2) provides the best steel corrosion protection.

The innovative oval shaped holes make it suitable for all fencing applications with more attachment options than other Y posts with round holes.

More Jio post holes improve wire alignment and attachment.

The holes are designed to line up with traditional Y posts with round holes and allow for multiple accessory options like clips, ties, and electrics.

easy and quick to install with a manual post driver.

Available at Sprenger's in;

165cm, 180cm and 240cm lengths.

WARATAH Galvanized star pickets are purchasable in packs of 10 in store.

SSC: 301527

PICK UP IN STORE ONLY

The post that stand stands up to corrosive soil STOCKBOSS stands up to corrosive soils. The unique corrosion resistant wrap is bonded to the steel surface to protect the post in acidic, alkaline and saline soils. Combined with our propriety bituminous black coating to form a dual protection barrier that lasts 3x longer than traditional coatings. Featuring Barrier-Shield technology, the corrosion-resistant polymer wrap combines with the bituminous coating to form dual barrier against difficult soils. The wrap material is bonded to treated steel for an exceptional seal. It then extends 100mm above the ground for additional protection against differential corrosion (DC) in the critical zone above and just below the soil line. DC is known to create weak points at ground level through a combination of oxygen concentration and corrosive elements. StockBoss Black is also available in 180cm length, in an XL size for those tougher jobs*.

The StockBoss Advantage Dual barrier coating The corrosion resistant wrap combines with the bituminous coat creating a patented barrier that retains steel integrity 3 times longer than hot-dipped galvanised coatings Barrier-Shield Long-lasting shield between corrosive soils and the steel surface Above-ground protection The polymer wrap extends 100mm above ground level for added protection resisting differential corrosion Bonded to steel Even when driven into difficult soils, the bonding process ensures the steel continues to be protected Salt-spray lab testing Independently-tested to 1500hrs, indicating superior corrosion protection vs hot-dipped galvanised posts Field tested In-ground testing, successfully driven into a cross-section of Australian soils Unique line markings Exclusive to the Stockpost range of steel fencing posts.

WHITES black 240cm star pickets are purchasable in packs of 5 in store.

SSC: 10808

PICK UP IN STORE ONLY

Waratah black star post meets the demand for innovation in the rural industry.

Modern fencing continues to evolve and each new fence design requires a stronger, more ductile fence post with more attachment points.

Waratah black star pickets are purchasable in packs of 4 instore.

SSC: 160003

PICK UP IN STORE ONLY

Waratah black star post meets the demand for innovation in the rural industry.

Modern fencing continues to evolve and each new fence design requires a stronger, more ductile fence post with more attachment points.

Waratah black star pickets are purchasable in packs of 4 in store.

SSC: 160004

POST WALL THICKNESS 4.5mm

POST LENGTH 2100mm (7')

STAY WALL THICKNESS 2.3mm

STAY LENGTH 3250mm (11')

EYE BOLT Regular

More Ground Anchorage For A Stronger Strainer Post.

When it comes to end assemblies, you want something that’s built to last.

Rotech Rural’s DriveTight anchor lugs give our posts 8 times more ground anchorage than regular posts, so they can handle any kind of soil (even deep black soils), flood-prone areas or rocky terrain. You can trust that your end assemblies will stay put, no matter the conditions.

Plus, the larger ground anchorage can support heavier strains without shifting or leaning.

With DriveTight, you can have peace of mind knowing your fence is solid and secure. Our drive tight post end assembly kits take less that 15 minutes to install! Our unique Drive-Tight strainer post design and assembly kit can save you hours of work. You could easily do 10 to 30 assemblies in a day compared to the average 2 or 3.If you only have the one assembly to install, then you can spend the rest of your day doing something else that will make you more money. (Or you could enjoy the day sitting on your verandah with a cup of coffee.) Our kits are all made from steel and are either hot dipped galvanised, galvabond or stainless steel. This means they are termite proof, fire proof and long lasting. All of our Drive-Tight posts are 100NB. You can choose between a 40NB stay (good general purpose stay), or a 50NB stay (more heavy duty).

ABOUT OUR DRIVE TIGHT POST

Do you want the ease of driving a star picket and the versatility of a round steel post? Our Drive-Tight steel fence posts allow you to hand drive your post without needing a pneumatic driver. It drives in straighter than a round post, yet still offers the versatility of a round post. You are not restricted by 90 degrees like you are with an angle post. If you have a machine, the Drive-Tight post drives a lost easier and quicker due to the picket base, resulting in less wear and tear on your machine. To ensure that it is secure in the ground, we have included two lugs at a 40 degree angle that allows you to drive two half star pickets at an angle into the ground. These three points of anchorage gives you an extra strong strainer post. Combined with our strainer assemblies, the entire end assembly can be installed in under 15 minutes. It is the quickest end assemblies available. Installing your Drive-Tight steel fence posts is easy with the DriveTight post driver.

Key Features

FAST 15 MIN INSTALL

EASY TO USE

STRONG & RELIABLE

TERMITE PROOF

FIRE RESISTANT

VERSATILE

NO MACHINERY REQUIRED

GALVANISED

https://www.youtube.com/watch?v=Q7SaF6bkv0s

To install your posts you’ll need to purchase or hire a DriveTight Post Driver (or a compatible petrol driver, like this one.)

Hire is available only at selected stockist rural stores.

Enquire with your local store about hire availability.

SSC: RSATHDDT

PICK UP IN STORE ONLY

"BOUNDARY MESH"
UNIFORM SPACING FIELD FENCE
GALVANIZED TO MEET AUSTRALIAN STANDARDS
10cm X 10cm SQUARES

2.5mm WIRE

120CM HIGH (1200mm/1.2m)
50m ROLL

SSC: SS1200X100X100X2.5X50M

PICK UP IN STORE ONLY

BLACK PVC COATED CHAINWIRE

- 2.5mm wire
- 900mm high

- 50mm diameter openings
- 15m roll

SSC: ZP509025K

PICK UP IN STORE ONLY

BLACK PVC COATED CHAINWIRE
- 2.5mm wire

- 1800mm high
- 20m roll
- 60mm diameter holes

SSC: ZP6018025KK-B

PICK UP IN STORE ONLY

High Tensile Barbed Wire Long-life Blue Features:
Made from continuous no join, high tensile wire in a reverse twist pattern.
Meets Australian Standards (AS 2423:2002) with consistent twisting between barbs.
A flat section every 10 cm ensures barb spacing stays consistent and movement is limited.
Reverse twist pattern provides maximum strength and safety, allows the wire to unravel when it is placed under abnormal loads and reduces possible breaking.
Consistent and closer barb spacing means more barbs for maximum stock pressure and security.
No join in the wire coil provides consistent strength along the length of the reel.
Can be set as a sight or bottom wire, helps cope with added pressure from prime lambs and feral animals.

Specifications:
Diameter: 2.00mm
Breaking Strain: 5.0kN
Recommended Tension: 1.6kN
Reel Length: 500m

SSC: 312761