RURAL FENCING

Aviary Mesh  Large Birds

 • Ideal for most medium-large birds

 • Hot dip galvanised after manufacture for maximum corrosion protection

 • Small aperture, medium weight

Medium Birds

 • Ideal for most medium birds

 • Hot dip galvanised after manufacture for maximum corrosion protection

 • Standard 12mm x 25mm (½” x 1”)   aperture keeps vermin out

 Aviary Mesh Small Birds

 • Hot dip galvanised

 • Small aperture, lightweight

 • Ideal for most small home variety birds

Weight 19.3 kg Properties Whites Aviary Mesh is an economical, small aperture, lightweight mesh ideal for most small home variety birds. It allows good visibility into the aviary whilst keeping out most vermin. It is also suitable for many uses beyond aviary making. Note: It is recommended that new galvanised wire mesh used in aviaries and pet cages be treated to remove excess zinc that could possibly harm pets. Shave off any zinc spikes with a utility knife. The mesh should then be scrubbed with a mild solution of vinegar (2 cups in a bucket of water), and rinsed with clean water. Ideal for most small home variety birds such as Finches, Budgerigars and Canaries Hot dip galvanised after manufacture for maximum corrosion protection Small aperture, lightweight Length 30m Finish Hot Dipped Galvanised Height 120cm Diameter 0.80mm Aperture 12.7x12.7mm

SSC: 20824

Product Details 12mm (1/2") aperture Jack Aviary Mesh is an economical, small aperture, medium weight mesh. Ideal for most medium-large birds such as Peachface, Cockatiels, African Love Birds, all Australian Parrots up to Galah Size. The heavy gauge wire keeps out most vermin. It is also suitable for many uses beyond aviary making. Not recommended for species such as cockatoos and macaws. Suggested breeds are a guide only – the actual mesh used will also depend on the design and construction of your cage, aviary or pen. Be sure to take into account wire diameter, aperture and roll size when selecting a mesh for a project. Now also available in our enhanced quality Framing Mesh range. Note: It is recommended that new galvanised wire mesh used in aviaries and pet cages be treated to remove excess zinc that could possibly harm the pets. Shave off any zinc spikes with a utility knife. The mesh should then be scrubbed with a mild solution of vinegar (2 cups in a bucket of water), and rinsed with clean water. Item Product Code Length (m) Height (cm) Aperture (mm) Wire Diameter (mm) Finish Medium 20822 30 90 12 x 12 Galvanised -Large Bird

SSC: 20822

Manufactured from high tensile steel Heavily galvanised for long life Pack of 25 includes tool and clips

SSC: 10512

150mm - 200mm 6 - 8 inch Iron bark. Strong & durable Untreated Natural resistance to rot, termites & harsh weather conditions Click and collect only, use code 'COLLECTINSTORE' at checkout.

TIMBER POSTS WILL BE KEPT IN THEIR ALLOCATED RACKS UNTIL PICK UP.

All Super Steel gates are made from 25mm N.B. Extra light galv. Pipe and are made to Australian standards AS1163.

Bar are constructed with 5 horizontal bars, welded for increased strength.

All Super Steel gates are made from 25mm N.B. Extra light galv. Pipe and are made to Australian standards AS1163.

Bar are constructed with 5 horizontal bars, welded for increased strength.

All Super Steel gates are made from 25mm N.B. Extra light galv. Pipe and are made to Australian standards AS1163.

Bar are constructed with 5 horizontal bars, welded for increased strength.

All Super Steel gates are made from 25mm N.B. Extra light galv. Pipe and are made to Australian standards AS1163.

Bar are constructed with 5 horizontal bars, welded for increased strength.

All Super Steel gates are made from 25mm N.B. Extra light galv. Pipe and are made to Australian standards AS1163.

5.0mm infill mesh is used wit an aperture of 200m (W) x 100mm (H)

All Super Steel gates are made from 25mm N.B. Extra light galv. Pipe and are made to Australian standards AS1163.

5.0mm infill mesh is used wit an aperture of 200m (W) x 100mm (H)

All Super Steel gates are made from 25mm N.B. Extra light galv. Pipe and are made to Australian standards AS1163.

5.0mm infill mesh is used wit an aperture of 200m (W) x 100mm (H)

All Super Steel gates are made from 25mm N.B. Extra light galv. Pipe and are made to Australian standards AS1163.

5.0mm infill mesh is used wit an aperture of 200mm (W) x 100mm (H)

All Super Steel gates are made from 25mm N.B. Extra light galv. Pipe and are made to Australian standards AS1163.

Bar are constructed with 5 horizontal bars, welded for increased strength.

All Super Steel gates are made from 25mm N.B. Extra light galv. Pipe and are made to Australian standards AS1163.

Bar are constructed with 5 horizontal bars, welded for increased strength.

All Super Steel gates are made from 25mm N.B. Extra light galv. Pipe and are made to Australian standards AS1163.

5.0mm infill mesh is used wit an aperture of 200m (W) x 100mm (H)

All Super Steel gates are made from 25mm N.B. Extra light galv. Pipe and are made to Australian standards AS1163.

5.0mm infill mesh is used wit an aperture of 200m (W) x 100mm (H)

All Super Steel gates are made from 25mm N.B. Extra light galv. Pipe and are made to Australian standards AS1163.

Bar are constructed with 5 horizontal bars, welded for increased strength.

All Super Steel gates are made from 25mm N.B. Extra light galv. Pipe and are made to Australian standards AS1163.

5.0mm infill mesh is used wit an aperture of 200m (W) x 100mm (H)

200 - 250mm 8-10 inch Iron bark. Strong & durable Untreated Natural resistance to rot, termites & harsh weather conditions Click and collect only, use code 'COLLECTINSTORE' at checkout.

TIMBER POSTS WILL BE KEPT IN THEIR ALLOCATED RACKS UNTIL PICK UP.